Kohler Digital Interface K-684 Instrukcja Użytkownika Pobierz pdf (Strona 6)

2. Prepare the Site

NOTE: Portrait interface shown, landscape interface also available.

NOTE: Allow for a 1/4″ (6 mm) overlap for the lip of the wall sleeve and a minimum clearance of 1/2″

(1.3 cm) around the back of the opening to enable the clips to fully engage.

Refer to the rough-in information. With a pencil, mark the cut lines onto the ﬁnished wall.

Carefully cut out the opening in the ﬁnished wall following the penciled guidelines.

For thin ﬁnished wall materials of less than 3/16″ (5 mm), shim around the back of the opening to

provide adequate support for mounting the interface wall sleeve.

1/4" (6 mm)

Interface lip

Cutout

Wall

Shim

Clamp Arm

7-11/16"

(19.5 cm)

3-11/16"

(9.4 cm)

52" (132.1 cm)

1/2" (1.3 cm) Min

Clamp Arm

Clearance

3/16" (5 mm) Min –

2" (5.1 cm) Max Depth

1043184-2-B 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Brak uwag

Kohler Digital Interface K-684 Instrukcja Użytkownika Strona 6