Kohler K-72218-B7-VS Przewodnik Instalacji Pobierz pdf (Strona 17)

Troubleshooting (cont.)

Faucet Troubleshooting Table

Symptoms Probable Causes Recommended Action

C. The hot

and/or cold

supply hose

is kinked or

twisted.

C. Conﬁrm the supply hoses are

not kinked or twisted. If coiled,

maintain an inside diameter of

3″ (76 mm).

D. The outlet

hose is

kinked.

D. Conﬁrm the solenoid valve is

located within 7″ (178 mm) to

8″ (203 mm) from the faucet

base.

E. One or more

screens are

clogged.

E. Refer to the ″Cleaning the

Screens″ section.

F. Cracked

diaphragm.

F. Replace the solenoid valve

assembly.

3. Poor spray

pattern.

A. The spray

nozzles are

clogged.

A. Rub your ﬁnger over the

nozzles with water running to

dislodge debris.

4. Circuit

board LED

is not lit.

A. No power to

the circuit

board.

A. Check the power supply

connections to the circuit

board.

B. Power cord is

plugged into

a switched

outlet.

B. Plug the power cord into an

unswitched 120 VAC outlet

(test the outlet with a radio or

other device). Conﬁrm the

circuit board LED illuminates.

Solenoid Troubleshooting Table

Symptoms Probable Causes Recommended Action

1. Water

leaking

from the

valve.

A. Hose

connections

are not

secure.

A. CAUTION: Risk of personal

injury or product damage.

Turn off the main power and

water supply. Check all

connections. Make adjustments

as needed.

B. Internal leak. B. Replace the solenoid valve

assembly.

2. No audible

″click″

when

solenoid is

activated.

A. Loose

solenoid wire

connection.

A. Check solenoid wire

connection to the circuit board.

Kohler Co. 17 1186051-2-D

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag