Kohler K-6366-96 Przewodnik Instalacji Pobierz pdf (Strona 5)

3. Install the Bath

Apply a generous amount of silicone adhesive to the support blocks on the bottom of the bath.

Apply sealant to the gaskets on the drain and overﬂow assembly.

With help, carefully lift the bath into place over the apron. Make sure the bath rim engages the top

of the apron on all sides.

Verify that the bath is level and that all support feet are in contact with the ﬁnished ﬂoor. Carefully

install shims under the support blocks as needed.

Secure all drain connections and ﬁttings.

Install a ﬂoor- or ceiling-mounted bath ﬁller according to the faucet manufacturer’s instructions.

Close the bath drain. Fill the bath to the overﬂow, and check for leaks.

If desired, apply a thin, continuous bead of clear or color-matched silicone sealant to the seam

between the bath and the ﬁnished ﬂoor.

Care and Cleaning

For best results, keep the following in mind when caring for your KOHLER product:

•

Always test your cleaning solution on an inconspicuous area before applying to the entire surface.

•

Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and

dry any overspray that lands on nearby surfaces.

•

Do not allow cleaners to soak on surfaces.

•

Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring

pad to clean surfaces.

For detailed cleaning information and products to consider, visit www.kohler.com/clean. To order Care &

Cleaning information, call 1-800-456-4537.

Removing Minor Surface Damage

Your solid surface acrylic bath is strong and durable, and will provide you with years of satisfaction. If you

observe stains or minor scratches in the acrylic surface, follow these steps to quickly repair your bath.

IMPORTANT! This repair procedure is not appropriate for deep scratches, gouges, or chips. For damage

of that nature please contact Kohler Co. or a local solid surface repair professional.

NOTE: We recommend wet sanding to extend the life of the sandpaper, although dry sanding will

produce the same quality repair.

NOTE: Use 400 grit sandpaper to remove scratches and stains.

Apply adhesive

to support blocks.

Apply sealant.

Kohler Co. 5 1214189-2-B

1 2 3 4 5 6 7 8 9 10 ... 19 20

Brak uwag

Kohler K-6366-96 Przewodnik Instalacji Strona 5